| Model Name |
PSD1600 |
| Topology |
Line interactive |
| INPUT |
| Voltage |
240Vac |
| Frequency |
50/60Hz (+/-5Hz) Auto Sensing |
| Voltage Range |
177Vac to 290Vac |
| OUTPUT |
| Output Voltage |
240Vac |
| Output Voltage Regulation |
240Vac (+/- 10%) |
| Frequency |
AC mode tracks utility. Battery Mode (50Hz +/-1%) |
| Frequency Range (Battery Mode) |
50Hz or 60Hz (+/- 1%) |
| Transfer Time |
2-6 ms, 10ms max (typical) |
| Start on Battery |
Yes |
| Waveform (Batt. Mode) |
Simulated Sine Wave |
| VA/Wattage |
1600VA/960W |
| Numbers of Outlets |
6 - (3x Battery backup/surge protected and 3x
Surge Protection) |
| PROTECTION |
| EMC |
EN62040-2 2006 |
| Safety |
EN62040-1-1 2003, IEC60950-1:2001 |
| Full Protection |
Overload, discharge and overcharge protection |
| BATTERY |
| User Replaceable Battery |
12V*9AH (x2) |
| Backup Time (One PC load @ 120W) |
45 minutes |
| Operation Environment |
Temperature 0-40C, Humidity 0-90% Non condensing |
| Full load backup time |
2.5 mins |
| Software |
PowerShield NetGuard supports Windows, Linux, Unix & Apple Mac |
| Audible Noise |
<40dBA |
| Recharge Time to 90% |
4-6 Hours |
| COMMUNICATIONS & MANAGEMENT |
| Battery Mode |
2 beeps every 30 sec |
| Low Battery |
Rapid beep (one sec intervals) |
| Overload |
Constant Beeping |
| Battery Replacement Alarm |
Constant Beeping |
Fault |
Constant Beeping |
| Smart LCD |
Input voltage
Output voltage
AC mode indicator
Battery mode indicator
Load level indicator, flashing indicates overload
Battery capacity indicator, flashing indicates low battery level |
| COMMUNICATIONS INTERFACE |
| Interface |
USB |
| PHYSICAL |
| Dimentions (LxWxH) |
397x146x205mm |
| Weight |
11.5kgs |
| |
|
Click to download Powershield Connected Equipment warranty
information sheet |
 |
| |
|
