Products
Warranty
Faq
About Us
Contact Us
Where to Buy
Product List
Powershield - Defender (PSD1200)

SURGE PROTECTION
PLUG-IN

- PowerGuard Extreme Computer
- PowerGuard Extreme Notebook
- PowerGuard Notebook Protector
- PowerGuard Notebook Charge All

- PowerGuard Computer Protector
- PowerGuard VoltGuard Duo
- APE Computer Protector

UPS (Uninterruptible Power Supply)

- Powershield SafeGuard (PSG750)
- Powershield Defender (PSD1200)

- Powershield Defender (PSD1600)

FEATURES



- Excellent microprocessor control guarantees high reliability
- Australian outlets for UPS and Surge protection (x3)
- Australian outlets for Surge protection (x3)
- Boost and buck AVR for voltage stabilization
- User replaceable batteries
- Silent Operation (No fans included)
- Auto Restart while AC is recovering
- Off-mode charging
- Cold Start Function
- USB communication sophisticated NetGuard software



DESCRIPTION


The Defender range use Automatic Voltage Regulation (AVR) to minimise the effects of fluctuations in input voltage protecting your valuable equipment from power line disturbances.

The stylish LCD display, user replacable batteries and six Australian sockets makes the defender the complete package at this level.

Applications include:
- Home office equipment
- Work stations
- Rack equipment
- Point of sale equipment


SPECIFICATION
Model Name PSD1200
Topology Line interactive
INPUT
Voltage 240Vac
Frequency 50/60Hz (+/-5Hz) Auto Sensing
Voltage Range 177Vac to 290Vac
OUTPUT
Output Voltage 240Vac
Output Voltage Regulation 240Vac (+/- 10%)
Frequency AC mode tracks utility. Battery Mode (50Hz +/-1%)
Frequency Range (Battery Mode) 50Hz or 60Hz (+/- 1%)
Transfer Time 2-6 ms, 10ms max (typical)
Start on Battery Yes
Waveform (Batt. Mode) Simulated Sine Wave
VA/Wattage 1200VA/720W
Numbers of Outlets 6 - (3x Battery backup/surge protected and 3x Surge Protection)
PROTECTION
EMC EN62040-2 2006
Safety EN62040-1-1 2003, IEC60950-1:2001
Full Protection Overload, discharge and overcharge protection
BATTERY
User Replaceable Battery 12V*7AH (x2)
Backup Time (One PC load @ 120W)

40 minutes

Operation Environment Temperature 0-40C, Humidity 0-90% Non condensing
Full load backup time 2.5 mins
Software PowerShield NetGuard supports Windows, Linux, Unix & Apple Mac
Audible Noise <40dBA
Recharge Time to 90% 4-6 Hours
COMMUNICATIONS & MANAGEMENT
Battery Mode 2 beeps every 30 sec
Low Battery Rapid beep (one sec intervals)
Overload Constant Beeping
Battery Replacement Alarm Constant Beeping

Fault

Constant Beeping
Smart LCD Input voltage
Output voltage
AC mode indicator
Battery mode indicator
Load level indicator, flashing indicates overload
Battery capacity indicator, flashing indicates low battery level
COMMUNICATIONS INTERFACE
Interface USB
PHYSICAL
Dimentions (LxWxH) 397x146x205mm
Weight 11.1kgs
 
Click to download Powershield Connected Equipment warranty
information sheet
PDF
   
     
Site Map Disclaimer Privacy Policy